CMC 6 XT
$1,675.00 + gst
To enquire about this product - click here
The CMC 6 XT extends the frequency response of the MK capsules up to 40 kHz.
Attention was paid to a low self-noise above 20 kHz. This maintains a high level of dynamics when recording at high sampling rates. Thus, the often very small signal above 20kHz is not covered and the noise is still low even after the down pitching.
Specifications:
Frequency range 20 Hz - 60 kHz
Sensitivity - see corresponding capsule (same as CMC 6
Maximum output voltage - 1 V (0 dBV) with 1 kΩ load
Low cut filter - 20 Hz, 12 dB/oct.
Minimum recommended load impedance - 1 kΩ
Output impedance - 42 Ω
Maximum cable length - > 400 m
SCHOEPS RFI Shield - Yes
Powering standard / Valid range - P48 / >20 V
P12 / >10 V
Current consumption
4 mA (P48)
8 mA (P12)
Common mode rejection ratio (at 1 kHz) > 60 dB
Output - XLR-3M, analog, 1 channel
Length - 116 mm
Diameter - 20 mm / ~0,8"
Weight - 60 g / 2,1 oz
Surface finish - matte gray (custom colours available - additional fee & lead time)
$1,675.00 + gst
To enquire about this product - click here
The CMC 6 XT extends the frequency response of the MK capsules up to 40 kHz.
Attention was paid to a low self-noise above 20 kHz. This maintains a high level of dynamics when recording at high sampling rates. Thus, the often very small signal above 20kHz is not covered and the noise is still low even after the down pitching.
Specifications:
Frequency range 20 Hz - 60 kHz
Sensitivity - see corresponding capsule (same as CMC 6
Maximum output voltage - 1 V (0 dBV) with 1 kΩ load
Low cut filter - 20 Hz, 12 dB/oct.
Minimum recommended load impedance - 1 kΩ
Output impedance - 42 Ω
Maximum cable length - > 400 m
SCHOEPS RFI Shield - Yes
Powering standard / Valid range - P48 / >20 V
P12 / >10 V
Current consumption
4 mA (P48)
8 mA (P12)
Common mode rejection ratio (at 1 kHz) > 60 dB
Output - XLR-3M, analog, 1 channel
Length - 116 mm
Diameter - 20 mm / ~0,8"
Weight - 60 g / 2,1 oz
Surface finish - matte gray (custom colours available - additional fee & lead time)
$1,675.00 + gst
To enquire about this product - click here
The CMC 6 XT extends the frequency response of the MK capsules up to 40 kHz.
Attention was paid to a low self-noise above 20 kHz. This maintains a high level of dynamics when recording at high sampling rates. Thus, the often very small signal above 20kHz is not covered and the noise is still low even after the down pitching.
Specifications:
Frequency range 20 Hz - 60 kHz
Sensitivity - see corresponding capsule (same as CMC 6
Maximum output voltage - 1 V (0 dBV) with 1 kΩ load
Low cut filter - 20 Hz, 12 dB/oct.
Minimum recommended load impedance - 1 kΩ
Output impedance - 42 Ω
Maximum cable length - > 400 m
SCHOEPS RFI Shield - Yes
Powering standard / Valid range - P48 / >20 V
P12 / >10 V
Current consumption
4 mA (P48)
8 mA (P12)
Common mode rejection ratio (at 1 kHz) > 60 dB
Output - XLR-3M, analog, 1 channel
Length - 116 mm
Diameter - 20 mm / ~0,8"
Weight - 60 g / 2,1 oz
Surface finish - matte gray (custom colours available - additional fee & lead time)