To enquire about this product - click here
The CMC 1 KV is identical to the CMC 1 U, but instead of the built-in XLR connector, it has a fixed cable coming out the side.
The CMC 1 KV is identical to the CMC 1 K, but has a side-outgoing cable instead of a rear outgoing cable.
The variants of the CMC 1 KV with Lemo connector are compatible with pocket transmitters that provide P48 or P12, e.g. Zaxcom ZMT 4, SoundDevices A20-TX, Deity DLTX.
The CMC 1 KV is particularly suitable as a "plant mic" in film sound or for all recordings where the microphone needs to be discreetly hidden. With the supplied magnet accessories, it can be easily mounted on many surfaces, e.g. door frames, steel beams, windows, table tops etc
It’s available with different cable lengths and plugs, also with Lemo 3pin for use on pocket transmitter with P12/48. Standard: 2m with XLR3M
Tech Specs:
Frequency range : 20 Hz – 20 kHz
Maximum output voltage : 1.8 V (5 dBV) at 1 kΩ load
Maximum sound pressure level (THD < 0.5 %) : 135 dB-SPL (P48) with MK 4 & 131 dB-SPL (P12) with MK 4
Low cut filter : 20 Hz, 12 dB/octave
Output impedance : 50 Ω ± 1 Ω (8 Hz – 50 kHz)
Minimum recommended load impedance : 1 kΩ
Common mode rejection ratio (at 1 kHz) : > 55 dB
Maximum cable length : > 400 m / 1300 ft
Schoeps RFI Shield : Yes
Powering standard / Valid range : P48 / 30 V – 52 V & P12 / 11 V – 13 V
Current consumption : 2 mA (P48) & 3 mA (P12)
Output : XLR-3M, analog, 1 channel
Length : 29 mm / ~1.1"
Weight : ~28 g / 1 oz (without cable)
Diameter : 20 mm / 0.8"
Surface Finish : Matte Grey
Custom Colour : Chromagreen, Smoked Silver (Additional Fee + Longer lead time)
To enquire about this product - click here
The CMC 1 KV is identical to the CMC 1 U, but instead of the built-in XLR connector, it has a fixed cable coming out the side.
The CMC 1 KV is identical to the CMC 1 K, but has a side-outgoing cable instead of a rear outgoing cable.
The variants of the CMC 1 KV with Lemo connector are compatible with pocket transmitters that provide P48 or P12, e.g. Zaxcom ZMT 4, SoundDevices A20-TX, Deity DLTX.
The CMC 1 KV is particularly suitable as a "plant mic" in film sound or for all recordings where the microphone needs to be discreetly hidden. With the supplied magnet accessories, it can be easily mounted on many surfaces, e.g. door frames, steel beams, windows, table tops etc
It’s available with different cable lengths and plugs, also with Lemo 3pin for use on pocket transmitter with P12/48. Standard: 2m with XLR3M
Tech Specs:
Frequency range : 20 Hz – 20 kHz
Maximum output voltage : 1.8 V (5 dBV) at 1 kΩ load
Maximum sound pressure level (THD < 0.5 %) : 135 dB-SPL (P48) with MK 4 & 131 dB-SPL (P12) with MK 4
Low cut filter : 20 Hz, 12 dB/octave
Output impedance : 50 Ω ± 1 Ω (8 Hz – 50 kHz)
Minimum recommended load impedance : 1 kΩ
Common mode rejection ratio (at 1 kHz) : > 55 dB
Maximum cable length : > 400 m / 1300 ft
Schoeps RFI Shield : Yes
Powering standard / Valid range : P48 / 30 V – 52 V & P12 / 11 V – 13 V
Current consumption : 2 mA (P48) & 3 mA (P12)
Output : XLR-3M, analog, 1 channel
Length : 29 mm / ~1.1"
Weight : ~28 g / 1 oz (without cable)
Diameter : 20 mm / 0.8"
Surface Finish : Matte Grey
Custom Colour : Chromagreen, Smoked Silver (Additional Fee + Longer lead time)
